Microsoft Windows, Tips & Tricks

Fast Startup in Windows 11: What It Does and When to Turn It Off

Laptop with a lightning bolt on screen illustrating Fast Startup in Windows 11

Fast Startup is a Windows 11 feature, on by default, that makes a cold boot quicker. When you shut down, it saves the Windows kernel and drivers to the hibernation file instead of closing them, then reloads that state next time. Turn it off if you dual-boot, need a true clean shutdown, or have trouble reaching the BIOS.

Key takeaways

  • Fast Startup is a hybrid of shutdown and hibernation; it applies to Shut down, not to Restart.
  • It depends on hibernation. Running powercfg /hibernate off disables Fast Startup as well.
  • Microsoft doesn’t recommend turning it off as a general rule, but it causes real problems with dual-booting, some drivers and BIOS access.
  • Turn it off in Control Panel > Power Options > Choose what the power buttons do.
  • For a one-off full shutdown, choose Restart or run shutdown /s /t 0.

What is Fast Startup in Windows 11?

Fast Startup is a power setting that shortens boot time after a shutdown. When you click Shut down, Windows signs every user out but hibernates the kernel session and device drivers to hiberfil.sys on disk. At the next power-on, it reloads that saved state rather than starting the kernel from scratch.

Microsoft’s troubleshooting documentation on Fast Startup and hibernation describes it exactly this way, and confirms it is enabled by default. Your apps and documents are closed; only the system layer is preserved.

The speed gain is largest on machines with a hard drive. On a modern NVMe SSD, the difference between a fast and a cold boot is often only a few seconds, which is why many technicians are comfortable turning it off when it causes trouble.

Fast Startup vs shutdown vs hibernate vs sleep

Fast Startup sits between a full shutdown and hibernation. A full shutdown closes everything; hibernation saves everything including your open apps; Fast Startup saves only the kernel and drivers. Sleep keeps the whole session in RAM and uses a little power. Restart always performs a full shutdown and boot.

Mode What is saved Power use when off Kernel fully reset?
Shut down (Fast Startup on) Kernel session and drivers to disk None No
Shut down (Fast Startup off) Nothing None Yes
Restart Nothing n/a Yes
Hibernate Whole session, apps and documents, to disk None No
Sleep Whole session in RAM Low No

The practical consequence surprises people: if you only ever shut down, Windows may not have had a truly fresh start for weeks. Task Manager’s “Up time” figure on the Performance tab often reflects that, because it doesn’t reset after a Fast Startup shutdown.

Sleep, hibernate and shutdown icons linked to a laptop comparing Windows power states with fast startup

When should you turn Fast Startup off?

Turn Fast Startup off if you dual-boot with Linux or another Windows install, if a driver or device misbehaves after power-on but works after a restart, if you struggle to reach the BIOS/UEFI, or if updates seem to need several shutdowns to finish. Otherwise, leaving it on is fine for most people.

Dual-booting and shared drives

Because Windows hibernates its kernel, the NTFS volumes it was using are left in a hibernated state. Another operating system may refuse to mount them, or mount them read-only, to avoid corrupting data. Disabling Fast Startup is the standard fix for dual-boot set-ups.

Drivers, USB devices and odd glitches

A device that misbehaves after a shutdown but behaves after a restart points straight at Fast Startup, because the driver state was restored rather than reloaded. We see this regularly with docks, audio interfaces and some Wi-Fi adapters.

Getting into the BIOS/UEFI

A fast resume can shrink the window for pressing F2, F10 or Del at power-on. Use Restart instead, or follow our guide on how to enter UEFI/BIOS on Windows 11, which includes the Advanced startup route.

Updates and troubleshooting

Some updates and repairs only complete after a genuine restart. If an update keeps asking to finish installing, or a repair tool such as sfc /scannow reports fixes pending, choose Restart rather than Shut down so the changes are applied to a freshly loaded kernel.

How to disable Fast Startup in Windows 11

To disable Fast Startup, open Control Panel, go to Power Options, select “Choose what the power buttons do”, click “Change settings that are currently unavailable”, untick “Turn on fast startup (recommended)” and save. You need an administrator account. The change takes effect at your next shutdown.

Method 1: Control Panel

  1. Press Win + R, type powercfg.cpl and press Enter. This opens Power Options directly.
  2. Select Choose what the power buttons do in the left pane.
  3. Click Change settings that are currently unavailable and approve the admin prompt.
  4. Under Shutdown settings, untick Turn on fast startup (recommended).
  5. Click Save changes. To turn it back on, repeat and tick the box.

Method 2: Registry

The same setting is stored in the registry, which is useful for scripts. Back up the key before editing.

  1. Open regedit as administrator.
  2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Power.
  3. Set the DWORD HiberbootEnabled to 0 to disable Fast Startup, or 1 to enable it.

Method 3: Group Policy (Pro, Enterprise and Education)

Windows 11 Pro and above include the policy Require use of fast startup under Computer Configuration\Administrative Templates\System\Shutdown. If it is set to Enabled, it forces Fast Startup on and greys out the Control Panel option, so check it if the tick box won’t change. Windows 11 Home doesn’t include the Group Policy Editor, one of the differences covered in our Windows 11 Home vs Pro comparison.

Method 4: Turn off hibernation entirely

Running powercfg /hibernate off in an admin terminal removes hibernation, deletes hiberfil.sys and, because Fast Startup depends on it, disables Fast Startup too. Use this only if you never want Hibernate; powercfg /hibernate on reverses it.

Need Group Policy control over power settings?

If you manage several PCs and want policies such as “Require use of fast startup”, you need Windows 11 Pro or higher. A Windows 11 Pro OEM key suits a single new build; Home users can upgrade from Windows 11 Home to Pro without reinstalling.

Why is the Fast Startup option missing?

The Fast Startup tick box disappears when hibernation is disabled, because Fast Startup is built on the hibernation file. Turn hibernation back on with powercfg /hibernate on in an admin terminal, reopen Power Options and the option should return. A Group Policy can also grey it out.

  1. Right-click Start and choose Terminal (Admin).
  2. Run powercfg /hibernate on.
  3. Reopen powercfg.cpl > Choose what the power buttons do.
  4. If the option is greyed out rather than missing, check the Require use of fast startup policy described above.

Some virtual machines and systems without firmware support for hibernation never show the option. That is expected and nothing needs fixing.

If you want hibernation for Fast Startup only, Microsoft’s powercfg documentation describes a “reduced” hiberfile type that supports Fast Startup but not full hibernation, saving disk space.

How to do a full shutdown without disabling it

You don’t have to disable Fast Startup to get a clean boot now and then. Choosing Restart always performs a full shutdown and boot cycle, and running shutdown /s /t 0 from Command Prompt or Terminal performs a full shutdown rather than a hybrid one.

  • Restart: Microsoft states that Fast Startup doesn’t apply to Restart, so this is the quickest clean cycle.
  • shutdown /s /t 0: a complete shutdown with no delay. Adding /hybrid gives the Fast Startup style instead.
  • Desktop shortcut: create a shortcut with shutdown /s /t 0 as the target if you want a full shutdown button.

Our guide to the Windows shutdown command covers timers and the other switches in detail.

Frequently asked questions

Should I disable Fast Startup in Windows 11?

For most single-boot PCs with an SSD, leaving Fast Startup on does no harm. Disable it if you dual-boot, if devices misbehave after a shutdown but work after a restart, if you can’t reach the BIOS easily, or if updates keep asking for another restart. On SSDs the boot time cost is usually small.

Is Fast Startup the same as fast boot in the BIOS?

No. Fast Startup is a Windows feature that hibernates the kernel at shutdown. Fast Boot is a separate UEFI firmware option that skips some hardware checks during power-on. They can be used together or independently, and both can make it harder to press the BIOS key at startup.

Does Fast Startup affect Restart?

No. Microsoft says the Fast Startup setting doesn’t apply to Restart, so a restart always performs a full shutdown and boot cycle. That is why many problems that survive a shutdown disappear after a restart. If you want a clean start without changing settings, choose Restart.

Does disabling hibernation turn off Fast Startup?

Yes. Fast Startup saves the kernel session to the hibernation file, so running powercfg /hibernate off disables both and removes the Fast Startup option from Power Options. Turn hibernation back on with powercfg /hibernate on and the option returns.

Is Fast Startup bad for SSDs?

There is no good evidence that Fast Startup harms a modern SSD. It writes the kernel session to hiberfil.sys at each shutdown, which is a modest amount of data compared with normal use. The bigger reasons to switch it off are compatibility and troubleshooting, not drive wear.

Why does my PC show days of uptime when I shut it down every night?

Because Fast Startup hibernates the kernel instead of closing it, Task Manager’s uptime counter doesn’t reset after a normal shutdown. Choose Restart or run shutdown /s /t 0 and the counter starts again from zero.

The bottom line

Fast Startup is a sensible default that trades a full kernel reset for a slightly quicker boot. Turn it off when it gets in the way, and use Restart when you need a clean slate. If you’re reinstalling as part of troubleshooting, our Windows 11 Pro download, install and activation guide walks through the full process.

Resource Why it helps
How to enter UEFI/BIOS on Windows 11 Reaching firmware settings when Fast Startup gets in the way
Windows shutdown command Full shutdown, timers and switches
Windows 11 Home vs Pro Group Policy and other Pro-only tools
Windows 11 Pro OEM key Pro licence for a new build
Upgrade Windows 11 Home to Pro Add Pro features without reinstalling
Microsoft Learn: Fast Startup and hibernation How Fast Startup works and why Restart bypasses it
Microsoft Learn: powercfg options Hibernate and hiberfile type commands

Leave a Reply

Your email address will not be published. Required fields are marked *